Quality Inspector
EXCEL SCIENTIFIC EXCEL SCIENTIFIC Victorville, CA Victorville, CA Full-time Full-time $20 - $25 an hour $20 - $25 an hour Position Title:
Quality Inspector FLSA:
Non-Exempt Report To:
General Manager Department:
Quality Job
Summary:
The Quality Inspector is responsible for determining if product manufactured and sold by Excel Scientific conforms to specified requirements by performing a wide range of inspections, testing, and auditing in support of Quality Control operations.
This position shall also ensure that all established quality related functions, procedures, and policies are appropriately followed by all employees, and will provide support for any other activities as determined by the Manager.
Essential Job Functions:
Quality Control inspection and release of created work orders and labels for manufacturing and warehouse.
Quality Control inspection and testing of incoming, in-process, first article, and finished products for proper identity and documentation, defects and damage, proper dimensions using various inspection devices such as calipers, micrometers, scales, gauges, and optical comparators, and conformity to all applicable quality standards, specifications, procedures, and work instructions.
Inspections may involve compound angles and three-dimensional properties that require a good working knowledge of Geometric Dimensioning and Tolerancing (GD&T) principles.
Accurately generate, maintain, and control records of all inspection results, to include nonconformance reports, with concise descriptions of nonconforming conditions identified during inspection of product per quality procedures, work instructions, and ISO 9001 standards.
Control all non-conforming and potentially non-conforming product throughout execution of the disposition and Non-Conformance Report closure by employing quarantine procedures defined within quality procedures, work instructions, and ISO 9001 standards.
Work with other departments to resolve routine issues found during inspection tasks.
Label product with acceptance labeling once the product is deemed acceptable to be released per applicable company procedures, work instructions, and ISO 9001 standards.
Assist in preventing the recurrence of defects by performing appropriate follow-up, inspection, and verification of corrective action, as outlined in company procedures, work instructions, and ISO 9001 standards.
Perform and/or participate in internal and external audits of work areas to ensure compliance with company procedures, work instructions, and ISO 9001 standards, as required.
Identify, recommend, and implement continuous improvement of product, processes, and systems, escalate issues as necessary, and support the Quality Manager with various projects and other non-routine tasks as required.
Lead by example and motivate other employees to uphold quality standards and good workmanship practices by learning and employing all applicable quality standards and good workmanship practices during everyday job functions
Qualifications:
Education:
Associate Degree or technical certification/license in related field preferred.
Experience:
2
years related Quality Inspection experience in a medical device or biotech manufacturing environment with an understanding of Good Manufacturing Practices.
Knowledge of ISO 9001 standards preferred.
1
year experience supporting ECO's, NCR's, CAPA's.
1
year supporting audits.
2
years in Document Control.
Proficient in using hand-measuring instruments (micrometers, calipers, scales, etc.
).
Proficiency in MS Office and Outlook.
Independent, self-starter with exceptional communication (written and verbal) skills, detail-oriented, organized, and able to prioritize and balance department workloads in a fast-paced environment.
Competency in SharePoint workflow development and other SharePoint collaboration features is a plus.
Experience with electronic quality management systems software a plus.
Other skills and abilities required include:
1.
To perform this job successfully, the individual must perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skills, and abilities required.
Reasonable accommodations could be made to enable individuals with disabilities to perform the essential functions.
2.
LANGUAGE SKILLS:
Must possess strong interpersonal, verbal, and written communication skills to effectively present detailed information with all levels of employees, to include management, customers, and outside vendors.
Ability to communicate effectively across functional departments to address quality problems and conditions.
Ability to write reports, business correspondence, work instructions, and procedure manuals.
3.
MATHEMATICAL SKILLS:
Conversion from decimal to metric, area, and other generally used mechanical measurements.
Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
4.
REASONING SKILLS:
Ability to define problems, collect data, establish facts, and draw valid conclusions.
Ability to read, identify, analyze, and interpret complex engineering drawings, specifications, technical procedures and manuals, and all applicable regulatory standards.
5.
OTHER SKILLS AND ABILITIES:
Requires an extensive knowledge of inspection procedures, processes, devices and aids in a manufacturing environment, as well as comprehensive knowledge of inspection concepts and principles.
Demonstrated knowledge of organizational structure and skills to maintain the flow of work within the organization.
Must posess strong organization and time management skills, and experience with procedure documentation, training, and audit processes.
Knowledge of Quality improvement philosophy and techniques, and experienced in the use of applicable measurement devices, including but not limited to:
calipers, scales, micrometers, scales, gauges, and optical comparators.
Physical/Mental Requirements This section must be completed to comply with the Americans with Disabilities Act.
Physical Demands:
Medium work - Lifting of 50 pounds maximum While performing the duties of this job, the employee is regularly required to talk or hear.
The employee frequently is required to walk, stand, and use hands to finger, handle or feel objects, tools, or controls.
The employee is occasionally required to sit and reach with hands and arms.
While performing the duties of this job, the employee is occasionally exposed to mild odors associated with the production process and will sometimes work near moving mechanical parts.
The employee is occasionally required to climb or balance.
The employee must wear cleanroom gowns, rubber gloves, and hair/beard coverings when entering the cleanroom.
This job's specific vision abilities include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
The noise level in the work environment is usually moderate.
The work environment characteristics described here represent those employee encounters while performing the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Travel:
less than 5% travel Job Type:
Full-time Pay:
$20.
00 - $25.
00 per hour
Benefits:
Employee assistance program Flexible spending account Health savings account Schedule:
8 hour shift Day shift Monday to Friday Application Question(s):
(Required) What is your required salary expectation for this role?
Experience:
Quality inspection:
2 years (Required) Document management:
1 year (Required) Supporting audits:
1 year (Required) Work Location:
In person.
Estimated Salary: $20 to $28 per hour based on qualifications.
Quality Inspector FLSA:
Non-Exempt Report To:
General Manager Department:
Quality Job
Summary:
The Quality Inspector is responsible for determining if product manufactured and sold by Excel Scientific conforms to specified requirements by performing a wide range of inspections, testing, and auditing in support of Quality Control operations.
This position shall also ensure that all established quality related functions, procedures, and policies are appropriately followed by all employees, and will provide support for any other activities as determined by the Manager.
Essential Job Functions:
Quality Control inspection and release of created work orders and labels for manufacturing and warehouse.
Quality Control inspection and testing of incoming, in-process, first article, and finished products for proper identity and documentation, defects and damage, proper dimensions using various inspection devices such as calipers, micrometers, scales, gauges, and optical comparators, and conformity to all applicable quality standards, specifications, procedures, and work instructions.
Inspections may involve compound angles and three-dimensional properties that require a good working knowledge of Geometric Dimensioning and Tolerancing (GD&T) principles.
Accurately generate, maintain, and control records of all inspection results, to include nonconformance reports, with concise descriptions of nonconforming conditions identified during inspection of product per quality procedures, work instructions, and ISO 9001 standards.
Control all non-conforming and potentially non-conforming product throughout execution of the disposition and Non-Conformance Report closure by employing quarantine procedures defined within quality procedures, work instructions, and ISO 9001 standards.
Work with other departments to resolve routine issues found during inspection tasks.
Label product with acceptance labeling once the product is deemed acceptable to be released per applicable company procedures, work instructions, and ISO 9001 standards.
Assist in preventing the recurrence of defects by performing appropriate follow-up, inspection, and verification of corrective action, as outlined in company procedures, work instructions, and ISO 9001 standards.
Perform and/or participate in internal and external audits of work areas to ensure compliance with company procedures, work instructions, and ISO 9001 standards, as required.
Identify, recommend, and implement continuous improvement of product, processes, and systems, escalate issues as necessary, and support the Quality Manager with various projects and other non-routine tasks as required.
Lead by example and motivate other employees to uphold quality standards and good workmanship practices by learning and employing all applicable quality standards and good workmanship practices during everyday job functions
Qualifications:
Education:
Associate Degree or technical certification/license in related field preferred.
Experience:
2
years related Quality Inspection experience in a medical device or biotech manufacturing environment with an understanding of Good Manufacturing Practices.
Knowledge of ISO 9001 standards preferred.
1
year experience supporting ECO's, NCR's, CAPA's.
1
year supporting audits.
2
years in Document Control.
Proficient in using hand-measuring instruments (micrometers, calipers, scales, etc.
).
Proficiency in MS Office and Outlook.
Independent, self-starter with exceptional communication (written and verbal) skills, detail-oriented, organized, and able to prioritize and balance department workloads in a fast-paced environment.
Competency in SharePoint workflow development and other SharePoint collaboration features is a plus.
Experience with electronic quality management systems software a plus.
Other skills and abilities required include:
1.
To perform this job successfully, the individual must perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skills, and abilities required.
Reasonable accommodations could be made to enable individuals with disabilities to perform the essential functions.
2.
LANGUAGE SKILLS:
Must possess strong interpersonal, verbal, and written communication skills to effectively present detailed information with all levels of employees, to include management, customers, and outside vendors.
Ability to communicate effectively across functional departments to address quality problems and conditions.
Ability to write reports, business correspondence, work instructions, and procedure manuals.
3.
MATHEMATICAL SKILLS:
Conversion from decimal to metric, area, and other generally used mechanical measurements.
Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
4.
REASONING SKILLS:
Ability to define problems, collect data, establish facts, and draw valid conclusions.
Ability to read, identify, analyze, and interpret complex engineering drawings, specifications, technical procedures and manuals, and all applicable regulatory standards.
5.
OTHER SKILLS AND ABILITIES:
Requires an extensive knowledge of inspection procedures, processes, devices and aids in a manufacturing environment, as well as comprehensive knowledge of inspection concepts and principles.
Demonstrated knowledge of organizational structure and skills to maintain the flow of work within the organization.
Must posess strong organization and time management skills, and experience with procedure documentation, training, and audit processes.
Knowledge of Quality improvement philosophy and techniques, and experienced in the use of applicable measurement devices, including but not limited to:
calipers, scales, micrometers, scales, gauges, and optical comparators.
Physical/Mental Requirements This section must be completed to comply with the Americans with Disabilities Act.
Physical Demands:
Medium work - Lifting of 50 pounds maximum While performing the duties of this job, the employee is regularly required to talk or hear.
The employee frequently is required to walk, stand, and use hands to finger, handle or feel objects, tools, or controls.
The employee is occasionally required to sit and reach with hands and arms.
While performing the duties of this job, the employee is occasionally exposed to mild odors associated with the production process and will sometimes work near moving mechanical parts.
The employee is occasionally required to climb or balance.
The employee must wear cleanroom gowns, rubber gloves, and hair/beard coverings when entering the cleanroom.
This job's specific vision abilities include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
The noise level in the work environment is usually moderate.
The work environment characteristics described here represent those employee encounters while performing the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Travel:
less than 5% travel Job Type:
Full-time Pay:
$20.
00 - $25.
00 per hour
Benefits:
Employee assistance program Flexible spending account Health savings account Schedule:
8 hour shift Day shift Monday to Friday Application Question(s):
(Required) What is your required salary expectation for this role?
Experience:
Quality inspection:
2 years (Required) Document management:
1 year (Required) Supporting audits:
1 year (Required) Work Location:
In person.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
